Dettson R02P032, Инструкции по установке и руководство для владельца, Страница: 22 / 28

6 Advanced Installer Menu
This menu allows the installer to check installer-specific information or set advanced settings. It is accessible from the
Home screen when the
and buttons are pressed at the same time for three seconds.
Select the items using the or buttons and press the button to enter the item to view information or change
settings. Press Enter button to save any changes and display the previous menu or press Home to display the Home
Screen. If 2 minutes pass without any buttons pressed, the Home Screen will return and changes will not be saved.
Items on the Advanced Installer Menu are:
• Communicating Devices
• Fault Status
• USB Upload
• Thermostat Summary
• Heat Pump Disable*
• Aux Lockout*
• Dual Fuel Setpoint*
• Heat Cycle Rate
• Cool Cycle Rate
• Humidity Display Adjust
*Items marked with * may or may not appear in the list depending on the configuration of the system.
Communicating Devices
This menu item will list each piece of system equipment connected to the network. The equipment can be selected and
entered to view identifying information, operating information and setup status as described in section 6.1.
Fault Status
This menu item lists current equipment fault conditions. The system equipment experiencing the Fault will be listed with
details of the fault. If no faults are detected, this screen will show nothing.
Heat Pump Disable
Available only for heat pump systems with indoor electric heat. This
feature disables the heat pump and turns on electric heat below the
selected outdoor temperature. The temperature range is from 5°F to
50°F.
Aux Lockout Temperature
Available for heat pump systems. This feature disables the indoor
(electric or gas) heat above the selected outdoor temperature. The
temperature range is from the Heat Pump Disable setting to 95°F.
22