Dettson COND-09-01, Инструкции по установке и руководство для владельца

Страница: 21 / 76

21
21
6- INSTALLATION MANUAL
6.1- NOTICES FOR INSTALLATION
CAUTION
1. This unit should be installed only by authorized service
technicians according to local or government regulations and in
compliance with this manual;
2. If the unit is not installed but the authorized service technician,
the malfunction may not be solved due to inconvenient contact
between the user and the service personnel;
3.
Warning: before obtaining access to terminals, all supply
circuits must be disconnected;
4. The temperature of refrigerant line will be high; please keep the
interconnection cable away from the copper tube.
6.2- INSTALLATION SITE INSTRUCTIONS
Proper installation site is vital for correct and efficient operation of the
unit. Avoid the following sites where:
1. Strong heat sources, vapours, flammable gas or volatile liquids
are emitted;
2. High-frequency electro-magnetic waves are generated by radio
equipment, welders and medical equipment;
3. Salt-laden air prevails (such as close to coastal areas);
4.
The air is contaminated with industrial vapours and oils;
5. The air contains sulphurs gas such as in hot spring zones;
6.
Corrosion or poor air quality exists.
6.3- INSTALLATION SITE OF OUTDOOR UNIT
1. Select a site where there is sufficient ventilation;
2. Select a site where there is no obstruction blocking the inlet and
outlet;
3. The site should be able to withstand the full weight and
vibration;
4. Select a dry place, and do not expose the unit to direct sunlight
nor strong wind;
5.
Make sure that the outdoor unit is installed in accordance with
the installation instructions, and is convenient for maintenance
and repair;
6. The maximum height difference between indoor cooling coil
and outdoor unit is 32,8ft, and the maximum length of the
connecting tubing’s must not exceed 49,2ft(14.996 m) (09K),
65,6ft(19.995 m) (12K) and 82ft (24.994 m) (18/24K).
6.4- SAFETY PRECAUTIONS FOR ELECTRIC
APPLIANCES
1. A dedicated power supply circuit should be used in accordance
with local electrical safety regulations;
2. The unit should be reliably grounded and connected to and
exclusive ground device by the professionals;
3. The circuit breaker must have the functions of magnetic
dripping and heat dripping to prevent short circuit and overload;
4. The minimum distance between the unit and combustive
surface is 4,9 ft.(1.4935 m);
5.
The appliance shall be installed in accordance with national
wiring regulations:
6. An all-pole disconnection switch with a contact separation of at
least 0,1 inch in all poles should be connected in fixed wiring.
6.5- GROUNDING
1. Please ensure that the unit is reliably grounded;
2. The yellow-green wire in the outdoor unit is the grounding wire
which cannot be used for the other purposes. Improper
grounding may cause electric shock;
3. The ground must have reliable terminal. Please do not connect
wire with the following:
o
Water Pipe
o
Gas pipe
o
Sewer pipe
o
Other place that professional personnel consider is
unreliable.
4. The model and rated values of fuses should accord with the silk
print on fuse cover or related PCB.