Dettson CC15-M-V, Инструкции по установке и руководство для владельца

Страница: 7 / 40

2 INTRODUCTION
This multiposition Category IV condensing furnace is
CSA design certified direct vent (2 pipes) and non-direct
vent (1 pipe). The furnace is factory shipped for use with
natural gas. The furnace can be converted in the field
for use with propane gas when a conversion kit is used
(B40574-03)
This furnace is designed for minimum continuous return
air temperature of 60 °F (16 °C) or intermittent operation
down to 55 °F (13 °C) such as when used with a night
setback thermostat.
Return air temperature must not
exceed 80 °F (27 °C). Failure to follow these return
air temperature limits may affect reliability of heat
exchangers, motors, and controls.
2.1 CODES AND STANDARDS
Follow all national and local codes and standards in
addition to these instructions.
The installation must
comply with regulations of the serving gas supplier, local
building, heating, plumbing, and other codes. In absence
of local codes, the installation must comply with the
national codes listed below and all authorities having
jurisdiction. In the United States and Canada, follow all
codes and standards for the following:
Table 1 – Codes and Standards
TOPIC USA CANADA
Safety
National Fuel Gas
Code (NFGC) NFPA
54-2009/ANSI
Z223.1
and
the Installation
Standards, Warm
Air Heating and
Air Conditioning
Systems
ANSI/NFPA 90B
National Standard
of Canada, Natural
Gas and Propane
Installation
Code
(NSCNGPIC)
CAN/CSA B149.1
General
installation NFGC and the
NFPA 90B. For
copies, contact
the National
Fire Protection
Association Inc.,
Battery march
Park, Quincy, MA
02269; or for only
the NFGC contact
the
American
Gas Association,
400 N. Capitol,
N.W.,Washington
DC 20001
NSCNGPIC. For
a copy, contact
Standard Sales,
CSA International,
178 Rexdale
Boulevard,
Etobicoke (Toronto),
Ontario, M9W 1R3,
Canada
Combustion
and
and air
ventilation
Section 9.3 of
the NFPA54/ANSI
Z223.1 Air for
Combustion and
Ventilation
Part 8 of the
CAN/CSA B149.1,
Venting Systems
and Air Supply for
Appliances
Duct systems Air Conditioning Contractors Association
(ACCA) (Manual D), Sheet Metal and
Air Conditioning Contractors National
Association (SMACNA), or American
Society of Heating, Refrigeration, and
Air Conditioning Engineers (ASHRAE).
Acoustical
lining
and
fibrous glass
duct
current edition of SMACNA, NFPA 90B
as tested by UL Standard 181 for Class I
Rigid Air Ducts.
Gas piping and
pipe pressure
testing
NFPA 54/ANSI
Z223.1 NFGC;
Chapters 5, 6, 7,
and 8 and national
plumbing codes.
CAN/CSA-B149.1,
Part 6
Manufactured
Mobile
housing Manufactured
Home Construction
and
Safety
Standard, Title
24 CFR, Part 3280
or
The Standard
for Manufactured
Home Installations
ANSI/NCS A225.1
Canadian Standard
for
Series M92
Mobile Homes,
CAN/CSA Z240MH
Electrical
connections National Electrical
Code (NEC)
ANSI/NFPA 70
Canadian Electrical
Code CSA C22.1
Venting Part 7, Venting
of equipment,
latest edition of the
National Fuel Gas
Code
NPFA 54,
90A and 90B ANSI
Z223.1-
CAN/CSA-B149.1-
05 latest edition
7