Detnov CAD-150-8, Руководство пользователя

Страница: 76 / 158

38
GB
4- Procedure in case of alarm or fault
The analogue panel is designed to ensure an effective response in case of alarm. It is
necessary to know the panel to act correctly in a critical situation.
IMPORTANT : You must read the following steps, as it will help in case of alarm:
1. The main thing when there is an alarm is to remain calm, the panel’s fire bells and
sounders that warn of the fire may provoke a state of nerves that prevents us from
reacting and operate correctly.
2. The authorised user should have the user code that gives access to the panel’s
keyboard control.
3. The authorised user must press the Silence buzzer key to silence the panel’s
internal buzzer, and if you want to stop the sounders you must press the silence
sounders control.
4. The officer may identify the alarm as the panel’s display will indicate the type of
alarm or fault that has occurred in the system.
5. Having identified the cause of the alarm it is time to action the current emergency
plan in each room.
Once the problem has been solved, the panel has to be reset.
5- Procedure in case of System failuret
Where central the ruling system do not disconnect the power led on the system has
capacity to continue operating under “System failure mode”.
To disconnect the buzzer which tells CPU failure, disconnect the Jumper marked “OFF
BUZZER FAULT SYSTEM” display plate.
”System failure mode” is a timely mode, which is activated automatically after 5 minutes
of the system failure is detected, allows the system to work minimally can transmit an
alarm for as long as is in “System failure” waiting service solvent breakdown.
”System failure mode” operation is as follows: the elements in the loops will continue
being reviewed by independent of each loop microprocessors, in the event of any any
other device on the loop system alarm activate the sirens of base plate.