Set OKC cam
as shown
3
4
DP
(OFF)
Set selector switch functions (See Table A)
Re-install
cam assembly
CORRECT
WRONG
Connect 9-volt battery
and install as shown
5
(Default settings shown)
Collar required if distance
is greater than 5/16".
Optional collar can be ordered
from Detex (p/n: ECL-1595)
If 7-pin cylinder is used -
OBSERVE
Table A: Selector Switch Functions
STATUS
INDICATOR
(SWITCH B)
OFF* No indication that device is armed or disarmed.
ON
DP
(SWITCH A)
OFF*
Door chime mode
ON
Door prop mode
( *Default settings; **Will shorten battery life)
ARMED - red LED blinks approximately every 6 seconds.**
DISARMED - green LED blinks approximately every 6 seconds.**
STATUS
INDICATOR
(OFF)
A
AR
B
DP
NOTE: For "Key Stop", See Step 9
1
Install mortise cylinder with cylinder nut provided
Cam orientation as shown
with key removed
2
Mortise cylinder
Unfasten
(2) screws
STEPS 1-5: PREP DEVICE
Remove cam assembly
from cover
104889 Page 2