background image

6500 Series Control Head Mechanical Information

All of our turnstiles and ADA gates operate with a mechanism called the 6500 Series Control Head.

This sturdy and easy to maintain drive for the turnstile has replaced all previous model control heads. 

It is adaptable to nearly any existing turnstile and comes with each new turnstile purchase. This control 

job site.

An internal view of an electronically controlled two way 6500 series control head.

potential is reached in the case of an electronic two way control head. In this instance, each rotational 

per valid entry request. Our anti-backup cams are designed so that it is mechanically impossible to 

become trapped within the turnstile when properly installed.

recommendations. Installation is simple: connect inputs from access control devices into the logic 

controller and plug the unit’s power supply into a 100-240 VAC (single phase) receptacle. The power 

supply will automatically set itself to function on your local voltage and convert it to 24VDC.

 

512-321-4426 

INS-DS500-190401

Designed Security, Inc - 1402 Hawthorne Street, Bastrop Texas 78602 - (800) 272-3555

 

[email protected] 

9

Содержание DSI DS500




























Отзывы: