DETEWE OpenCom 510 Скачать руководство пользователя страница 14

Страница: 14 / 164

Authorisations

Factory Settings

■

External calls can be transferred
to an external subscriber.

■

Three-party conferences can be
set up.

■

During a consultation call, the
waiting party hears music on
hold, provided a music-on-hold
file has been loaded into the sys-
tem.

■

Call protection, call-waiting pro-
tection and intercom protection
are deactivated.

■

The presentation of the user’s
own phone number (MSN or sys-
tem access number) on the dis-
play of the external party’s ter-
minal is activated, but can be
suppressed.

■

The telephone lock can be acti-
vated. The terminal PIN is
“0000”.

■

Interception of malicious callers
is possible if this feature has
been ordered from the network
operator.

■

Speed dialling is possible, pro-
vided it has been configured in
the OpenCom 510 central tele-
phone book.

■

The blacklist, the whitelist and a
call filter are not pre-configured
and thus not active. If these lists
are configured, they can be acti-

vated for the user groups. A spe-
cial list with emergency tele-
phone numbers is preset and
activated.

■

External and internal calls not
answered by a user are entered
in their call list.

■

The door opener can be oper-
ated from all terminals. Door
calls can be forwarded.

■

Keypad dialling is possible.

■

The user group is not authorised
to change the system’s time
groups.

■

Call forwarding for SMS calls in
the fixed-lines network is not ac-
tivated.

■

Connection data analysis is de-
activated.

■

The cost multiplier is set to
100%, i.e. the costs are not mul-
tiplied by any factor.

■

Call charges can be recorded, as-
sociated with booking numbers
and analysed.

■

Every user can change the con-
figuration of the OpenCom 510.

■

Every user can create a personal
telephone book and edit entries
in the central telephone book.

Содержание OpenCom 510





































































































































































Результаты поиска

Содержание OpenCom 510

Отзывы:

Бренды по названию

Популярные бренды

DETEWE OpenCom 510, Руководство пользователя

Результаты поиска

Содержание OpenCom 510

Отзывы:

Бренды по названию

Популярные бренды