15
Calling
Press
g
.
Enter the desired call number via the numerical keypad.
The number is dialled immediately.
The call number dialled
is displayed.
Enter the desired call number via the numerical keypad
or
Press
w
repeatedly ("P" flashes), until the desired call
number appears in the display (Redial/Caller List)
or
Press
P
(
w
) and the corresponding number under which the
call number is stored (speed-dialling).
Press
g
.
The call number displayed
is now dialled.
Call duration display:
After conclusion of the first minute of
the call, the call duration is displayed
in intervals of 5 seconds.
Your BeeTel contains a list (Redial Stack) of 10 memory
slots, in which the most recently dialled numbers and the
numbers of incoming calls are stored (depending on trans-
mission of the call number by the respective network opera-
tor). The number displayed first is either the number dialled
most recently or the number of the last registered caller
Press
w
, ”P” flashes:
"Page" through the numbers in this
list by pressing the key repeatedly.
In order to distinguish between
dialled numbers and registered caller
numbers, the latter are preceded by
a "C".
A B C
D
E FGHI
Ç !“§$%&/()=
A B C
D
E FGHI
=!(=%§§(§)§
A B
C D E
FGHI
!§–$=
A B
C D E
FGHI
=!(=%§§(§)§
A B
C D E
FGHI
=!(=%§§(§)§
Standard
calling
Block dialling
Redial/Caller List
Speed-dialling
Redial/Caller
List