background image

DISC

0N

0N

Fe

DEPTH

DISC

LIGHT

1

6

DESCRIPTION OF THE CONTROLS

DEPTH

DISCRIMINATION

The DEPTH button is the control directly affecting the sensitivity of the detector and its 
depth of detection. The value of depth is always inscribed in the bottom left end of the 
operative screen - the values are from 1 to 8. To make a change in the depth of your 
detector, simply press the DEPTH button. For about 5 seconds on the display will 
appear the ADJUST DEPTH screen.

DEPTH

TUNER

MIN

ADJUST DEPTH

MAX

1 2 3 4 5

6 7 8

Using the ARROW buttons DEPTH and TUNER you could change your DEPTH setting.
If you operate the detector in ideal ground conditions you could use higher settings of 
DEPTH for maximum depth penetration. But it is not necessary, as your detector is 
really a powerful penetrator. We recommend using  lower  settings of DEPTH - you’ll 
have the same great depth of detection with a much more stable operation.. 

Your detector has an unique, real discrimination of the ferrous (magnetic) objects 
through built-in the search coil magnetometer. The Discrimination mode of operation 
allows avoiding the unnecessary digging of the unwanted shallow ferrous targets. The 
detector is set in a way to discriminate only in the surface, arable layer of the ground. As 
it happens often the hoards of coins to be buried together with ferrous instruments, 
weapons or other ferrous objects. If the detector discriminated in its entire detection 
range, it would reject also the valuable hoards while eliminating the ferrous targets. If 
you have an information that the treasure you are looking for is in a ferrous vessel, or 
buried together with other ferrous objects you it is advisable  to turn off the 
discrimination. Turning ON/OFF the discrimination is made when the detector is in the
                                                                          operative screen by pressing the DISC
                                                                          button. Of course, you should know 
                                                                          that the discrimination is possible only 
                                                                          with a discriminating coil - such are 
                                                                          the coils with built-in magnetometer.
                                                                          With discrimination turned ON 
                                                                          and operating in AUTO mode when 
                                                                          passing the coil over a ferrous target  the
 sound will start to increase, and then will sharply fall into silence, the  graphics will
                                                        fall sharply and turn  black  and in the right bottom of
                                                        the screen will appear the symbol Fe. When you
                                                        operate in Manual mode the graphics will turn black 
                                                        the symbol Fe will appear, but there won’t be any
                                                        audio discrimination.

Содержание SSP-5100 G















Отзывы: