Detech SSP-5100 G, Инструкция по эксплуатации

Страница: 2 / 14

SSP-5100G
RESET RESET DEPTH TUNER DETECT
DELAY
ON/OFF
DISC
LIGHT
AUTO
VOLUME
SSP-5100G
VERSION 1.0
CONGRATULATIONS FOR PURCHASING YOUR SUPER SENSITIVE
PENETRATOR-5100G PULSE INDUCTION METAL DETECTOR.
Take the coil out of the leather bag. The coil is folded into sheaf, this is its
transport position. Put the sheaf on the ground, and arrange its elements to form a
square. You’ll find that your coil is different from the classic square coils of the PI
detectors - it has a middle sector. A magnetometer is built-in there, making possible
the unique discrimination of your detector. Now join all the tubing elements, as shown
on Figure 1. After the assembly position the coil on operational height (Figure 2) over
the ground surface, far from big metal objects. Attention: Take care for metal parts on
your shoes and wear.
For few seconds you’ll see on the
display the logo of the manufacturer, the
model of the detector and its software.
Connect the antennae cable to the control box using the coupling on the rear
panel. Then turn the detector on pressing the ON/OFF button.
1
Figure 1
Figure 2
PULSE INDUCTION
ASSEMBLY OF THE COIL AND TURNING THE DETECTOR ON