21
95-8547
9.2
REPLACEMENT PARTS
The detector is not designed to be repaired in the field. If
a problem should develop, refer to the “Troubleshooting”
section. If it is determined that the problem is caused by
an electronic defect, the device must be returned to the
factory for repair.
REPLACEMENT PARTS LIST
Part Number
Description
009208-002
oi
Replacement kit for X52/X22/X98 (5 Reflector Plates)
with Inspector Connector and Monitor
007307-002
Replacement
oi
Reflector Plate for X52/X22/X98
(requires Inspector Connector to calibrate)
DEVICE REPAIR AND RETURN
Prior to returning devices, contact the nearest local
Detector Electronics office so that a Return Material
Authorization (RMA) number can be assigned.
A
written statement describing the malfunction must
accompany the returned device or component to
assist and expedite finding the root cause of the
failure. When items are being returned, please note:
NOTE
Shipping personnel must be hazmat trained to
pack, mark, and label the return package. Please
consult your country-specific regulations.
Pack the unit properly. Always use sufficient packing
material. Where applicable, use an antistatic bag as
protection from electrostatic discharge.
NOTE
Det-Tronics reserves the right to apply a service
charge for repairing returned product damaged as
a result of improper packaging.
Return all equipment transportation prepaid to the factory
in Minneapolis.
NOTE
It is highly recommended that a complete spare
be kept on hand for field replacement to ensure
continuous protection.
NOTE
Radioactive material is subject to regulation. All
products containing a source tube meet the definition
of an “excepted package” for radioactive material
under the US Department of Transportation (DOT),
the International Air Transport Association (IATA),
the International Civil Aviation Organization (ICAO),
the International Maritime Dangerous Goods Code
(IMDG), and any other specific hazardous material
regulations from the country of source of return (TDG,
RID, ADR, etc.). These units are classified as “UN2911,
Radioactive Material, Excepted Package – Article.”
Not applicable to model X5200G; not subjected to
UN2911 Classification.
ORDERING INFORMATION
When ordering, please specify:
X5200, X5200G, or X5200M UVIR Flame Detector with
Pulse Output
Refer to the X5200 Model Matrix below for details
Q9033 Mounting Arm is required:
– Q9033A for aluminum detectors only
– Q9033B for aluminum and stainless steel detectors
ACCESSORIES
Part Number
Description
000511-029
Converter RS485 to RS232
103881-001
Converter RS485 to USB
007819-001
W6300B1002 Serial Inspector Connector
(Inspector Monitor software included)
007819-002
W6300B1003 USB Inspector Connector
(Inspector Monitor software included)
009207-001
Flame Inspector Monitor CD
103922-001
Model 475 HART Communicator
102740-002
Magnet
008082-001
Magnet and Adapter for Extension Pole
007739-001
Magnet and Extension Pole
007240-001
Q1116A1001, Air Shield (AL)
007818-001
Q1118A1001 Aluminum Air Shield/Flange Mount (AL)
007818-002
Q1118S1001 Stainless Steel Air Shield/Flange Mount (SS)
009177-001
Q1120A1001 Paint Shield mounting ring (AL)
006097-001
Q1201 Laser
102871-001
Laser Battery, 3V Lithium (laser)
007255-001
Q1201C1001 X-Series Laser Holder (AL/Plastic)
007338-001
Q2000A1001 X-Series Weather Shield (AL)
007290-001
Q9033B Stainless Steel Mounting Arm Assembly is for
aluminum and stainless steel detectors
007290-002
Q9033A Aluminum Mounting Arm Assembly is for aluminum
detectors only
011385-001
Q9033 Collar Attachment
101197-001
Stop Plug, 3/4” NPT, AL
101197-004
Stop Plug, 3/4” NPT, SS
101197-005
Stop Plug, M25, AL, IP66
101197-003
Stop Plug, M25, SS, IP66
010816-001
Stop Plug, 20 Pack, 3/4”NPT, AL
010817-001
Stop Plug, 20 Pack, 3/4”NPT, SS
010818-001
Stop Plug, 20 Pack, M25, AL, IP66
010819-001
Stop Plug, 20 Pack, M25, SS, IP66
103363-001
14 mm Hex Wrench (Steel)
103406-001
Screwdriver
001680-001
Window cleaner (6 pack)
107427-040
O-ring - Rear Cover (Viton) - black or brown
005003-001
1 oz grease for detectors (silicone-free)
104346-154
O-ring - Rear Cover (Fluorosilicone) - blue
012549-001
1 oz PTFE silicone-free lubricant
