Det-Tronics X3301, Дополнение

Страница: 14 / 21

95-8577 12 5.3
oi
MENU
1) Left
oi
Percentage of calibrated
oi
test signal returned by the left sensor. Reading
should be 90-100%. If reading is below 90%, go to “Device Setup,” select
“Calibration," and perform
oi
Calibration.
2) Middle oi Percentage of calibrated oi test signal returned by the middle sensor. Reading
should be 90-100%. If reading is below 90%, go to “Device Setup,” select
“Calibration," and perform oi Calibration.
3) Right oi
Percentage of calibrated
oi
test signal returned by the right sensor. Reading
should be 90-100%. If reading is below 90%, go to “Device Setup,” select
“Calibration,” and perform
oi
Calibration.
4)
oi
Fail Count Number of consecutive
oi
failures counted (one passed
oi
test resets the
counter).
5) Cons
oi
Fails Set (allowable) number of consecutive
oi
failures to produce a fault.
6)
oi
Cal Act
oi
calibration is in progress.
7) oi Cal Flt An oi calibration fault has occurred.
8) Man oi Act A manual oi test is in progress.
9) Man oi Flt
The detector has failed the last manual
oi
test.
oi
Menu
1) Left oi
2) Middle oi
3) Right oi
4) oi Fail Count
5) Cons oi Fails
6) oi Cal Act
7) oi Cal Flt
8) Man oi Act
9) Man oi Flt
Device Info Menu
1) General Info Menu
2) HART Info Menu
3) Status Info Menu
4) Detector Settings
5) History Menu
X3301 Root Menu
1) Fire (Yes/No)
2) Fault (Yes/No)
3) Device Info Menu
4) Command Menu
5) Device Setup Menu
Status Info Menu
1) Warm up (Y/N)
2) Fire (Y/N)
3) Auto
oi Flt (Y/N)
4) Dim Detect Flt (Y/N)
5) Det Disable Flt (Y/N)
6) Snsr Hdwr Flt (Y/N)
7) HIB Hdwr Flt (Y/N)
8) Int Comm Flt
9) Incompatible Flt
10) Voltage Fault (Y/N)
11) Hardware Menu
12)
oi Menu