manualshive.com logo in svg

Desert Aire CM3550 Series, Инструкция по установке и эксплуатации, Страница: 13 / 58

Поделиться
Скачать
Desert Aire CM3550 Series Скачать руководство пользователя страница 13

13

 

 

 

                                   

 

 

Figure 2

 

 

To return to the Home Screen, press the

 Esc

 key.

  Pressing 

the 

DOWN

 key from the Zone Setpoints screen will display the Zone Alerts

 

 

screen shown in Figure 3. If the zone sensor readings fall below the Min settings or  

 

 

rise above the Max settings, a Zone Alert will be triggered. Any alert will be recorded 

 

 

as an alarm and will require the alarm to be reset. Alerts will not affect the operation 

 

 

of the dehumidifier. This alarm point will be recorded in the Alarm pool condenser is  

 

 

supplied with the dehumidifier.

 

 

 

 

                      

  

Figure 3

 

 

To return to the MAIN MENU, press the

 Esc

 key.

 

2.3 

Main Menu (Figure 4)

  Pressing 

the 

Esc

 key from the Home Screen displays the MAIN MENU (Figure 4). 

 

 

This menu allows the operator to select the STATUS MENU, set an Occupancy 

 

 

Schedule, enter the Service Menu and view the Unit Revision.

Desert Aire - CM3550 Manual

Содержание CM3550 Series



























































Отзывы:

Нет отзывов