www.desatech.com
901273-01H
4
loCal Codes
Install and use log set with care. Follow all
local codes. In the absence of local codes,
use the latest edition of
The National Fuel
Gas Code ANSI Z223.1/NFPA 54*
.
*Available from:
American National Standards Institute, Inc.
1430 Broadway
New York, NY 10018
National Fire Protection Association, Inc.
Batterymarch Park
Quincy, MA 02269
ProduCT FeaTure
InsTallaTIon
unPaCkIng
CAUTION: Do not remove the
metal data plates from the burner
pan. The data plates contain
important warranty and safety
information.
1. Remove logs, hearth kit, pan materials,
and hardware from carton.
2. Remove all protective packaging applied
to logs and base for shipment.
3. Check heater for any shipping damage. If
heater is damaged call DESA Heating, LLC
at 1-866-672-6040 for replacement parts
before returning to dealer.
REMOTE READY SAFETY VALVE/
PILOT
This unit is provided with a milivolt remote ready
control valve which may be connected to option
-
al remote accessories for wall switch or wireless
operation (see
Accessories
, page 22).
Unit is tested and approved to
ANSI Z21.60
and
CSA 2.26
as a vented decorative appli
-
ance. It is supplied with the parts and instruc
-
tions to convert to propane/LP gas use.
WARNING: The Massachu-
setts State Board requires all
installations be performed by
a Licensed Plumber or Gas Fit-
ter. Massachusetts state code
requires all vent dampers be
welded open or removed.
CAUTION: Do not remove
the data plates attached to the
burner pan. The data plates
contain important warranty and
safety information.
WARNING: Before installing in
a solid fuel burning fireplace, the
chimney flue and firebox must be
cleaned of soot, creosote, ashes
and loose paint by a qualified
chimney cleaner. Creosote will ig
-
nite if highly heated. A dirty chim
-
ney flue may create and distribute
soot within the house. Inspect
chimney flue for damage.
NOTICE: Installation, service, and
repair of this appliance must be
performed by a qualified installer,
service agency, company or
gas supplier experienced with
this type of gas appliance. Only
factory authorized components
listed in these instructions may
be used in accordance with the
manufacturer’s instructions and
all codes and requirements of
the authority having jurisdiction.
Any modifications to this kit, or
use of unauthorized components
or accessory items will void the
manufacturer’s warranty, and may
result in a hazardous condition.
FLUE OPENING SPECIFICATIONS
Note: This vented appliance must be installed
only in a solid-fuel burning fireplace with a
working flue and constructed of noncombus
-
tible material.
