www.desatech.com
119426-01F
19
INSTALLATION
Continued
Rear Log
Grate
Prongs
Figure 26 - Installing VUL Model Log Sets
Bottom Log
Base Assembly
Front
Right Log
Front Left
Log
Base
Assembly
Figure 29 - Installing HRB Model Log Sets
Bottom
Log
Front Log
Figure 27 - Installing VUL Model Log Sets
Middle Right Log
Middle
Left Log
Bottom
Log
Pin on Front
Left Log
Figure 28 - Installing VUL36 Model
Control Cover Logs
Left Control
Cover Log
Right Control
Cover Log
Right Small
Front Log
Left Small
Front Log
Bracket
Bracket
6. Place middle left log over front left and
bottom logs as show in Figure 27. Be
sure hole in middle left log seats over pin
in front left log.
7. For VUL36 models, the front right and
left logs are longer and are supported
with brackets on each end (see Figure
28). Place the left and right small front
logs under the left bracket and beside
the right bracket.
8. For VUL36 models, position left and right
control cover logs as shown in Figure 28.
These may be placed as desired to hide
controls.
HRB Model Logs Only
1. Place bottom log in center of the base
assembly as shown in Figure 29.
2. Rest rear log in back corner sections of
base assembly as shown in Figure 29.
Make sure log is completely vertical and
not leaning in toward burner where the
flame will touch the log.
3. Position front log as shown in Figure 29,
making sure the grooves in the bottom of
the log fit over the grate prongs.
