www.desatech.com
122526-01B
21
#4 and round hole on log #6 with peg on
log #1 (see Figure 36).
7. Place top right log (#7) onto top middle
log #6 and front log (#3) matching peg on
bottom of top right log #7 with hole on top
middle log #6 and hole in top right log #7
with peg on front log (#3) (see Figure 36).
8. Place small front log (#8) into slot on right
bottom log (#3) as shown in Figure 37.
9. Two ember materials are supplied with
this log set.
Use only one type ember
material.
Platinum Bright Embers give
a bright glow appearing as hot coals.
Ceramat embers give a flickering glow
appearing as a dying ember bed.
Follow instructions for the ember material
you choose. Should embers need replac-
ing, see
Parts
, page 32.
4
Figure 34 - Installing Log #4
5
Figure 35 - Installing Log #5
6
7
Figure 36 - Installing Logs #6 and #7
INSTALLATION
Continued
8
Figure 37 - Installing Log #8
Rib
2. Place left bottom log (#2) onto base as-
sembly as shown in Figure 33, page 20.
See detail in drawing for contour on bot-
tom of log. Log will fit over metal brackets
and flat onto base assembly
3. Place right bottom log (#3) onto pan
burner as shown in Figure 33, page 20.
4. Place front log (#4) on top of left and
right bottom logs as shown in Figure 34.
Notches in bottom of log #4 will fit over
ribs in logs #2 and #3.
5. Place top left log (#5) onto rear log (#1) and
front log (#3). Match round peg on bottom
of top left log (#5) with round hole in front
log (#3) and square hole in log #5 with
square peg on log #1 (see Figure 35).
6. Place top middle log (#6) onto rear log (#1)
and front log (#3). Match square peg on
bottom of log #6 with square hole on log
