www.desatech.com
116686-01A
3
26.75
27.5
21.26
12.75
4.33
SAFETY INFORMATION
Continued
12. Use this heater only as described in this
manual. Any other use not recommended
by the manufacturer may cause fire, electric
shock or injury to persons.
13. Avoid the use of an extension cord because
the extension cord may overheat and cause
a risk of fire. However, if you have to use an
extension cord, the cord should be No. 14
AWG minimum size and rated not less than
1875 WATTS.
14. Always use properly grounded fused and
polarized outlets.
15. Always use ground fault protection where
required by electrical codes.
16. Always disconnect power before performing
any cleaning, maintenance or relocation of
heater.
17. To prevent a possible fire, do not burn wood
or other materials in this heater.
18 To prevent electric shock or fire, always use
a certified electrician should new circuits or
outlets be required.
19. When transporting or storing heater, keep in
a dry place free from excessive vibration and
store as to avoid damage.
LISTING APPROVALS
This heater has been tested in accordance with the
CSA Standards for fixed and location-dedicated
electric room heaters in the United States. All
components are UL or CSA safety certified.
If you need assistance during installation, please con-
tact your local dealer or the DESA Heating Products
Technical Services Department at 1-866-672-6040.
Description:
26" Fireplace/Insert
Voltage:
120
Watts:
1500
Amps:
15 Amp
Grounded Circuit
PRODUCT DIMENSION
SPECIFICATIONS
Figure 1 - Heater Dimensions
Note:
This heater must be electrically wired and
grounded in accordance with local codes or, in
the absence of local codes, with
National Electric
Code ANSI/NFPA 70-latest edition
or the
Cana-
dian Electric Code, CSA C2.1
as appropriate.
FL
Figure 2 - Product Identification
PRODUCT
IDENTIFICATION
Top Screen
Screws
Bottom Screen
Screw
Heat Vents
Back
Glass
ON/OFF
Power Button
Flame Control
Button and LED
Temp. Control
Button and LED
Bottom Panel
Fuse
