16
Technical Specifications:
WiImportant notes for electricians, in accordance with the
recommendations
of OS-
RAM and PHILIPS:
Operation within an electrical circuit that is protected against fault current (fault
current switch):
FFI switch (fault current protection switch - surge protector) -
30 mA:
maximum 10 LIGHTBRUSH
®
columns, or
maximum 10 LIGHTBRUSH
®
modules 1500, or
maximum 10 LIGHTBRUSH
®
modules 1200, or
maximum 10 LIGHTBRUSH
®
modules 590, or
maximum 10 LIGHTBRUSH
®
Cubes.
Explanatory Note: Switches of this type contain Y condensers that work against the
EARTH and consequently reduce fault current.
15
Replacing the Lamps
For economic reasons, we suggest to replace the entire lamp set, even if only one
lamp fails. Use only fluorescent lamps as recommended by the manufacturer. Ensure
that the replacement lamps have the proper length and wattage.
Caution: The lamps come in three colours (red - green - blue), even though the glass
tube itself appears as uniformly white. Please refer to the written specifications printed
on the fluorescent lamps!
Protect yourself against electrical hazard by unplugging the unit before
proceeding!
Unlock faulty lamps by turning them 90°, and remove the lamp.
Insert the replacement lamp with the appropriate colour into its assigned socket.
Ensure to follow the colour coding (red - green - blue) in the housing and the
specifications printed on the lamp.
Lock the replacement lamp in place by turning it 90°.
The RGB module is now again ready for use.
LIGHTBRUSH
®
Master-Module 1500:
Item No. 09916200
Colour Light Module with Control Unit
Type: RGB 1500 / Master
W/H/D: 1546 x 87.5 x 153 mm
Housing: Alu-polished
Weight: 4.1 kg
Power Input Plug 230 Volt, 16 A
Rated Power (Consumption): 180 VA
Power Output: 3200 VA
Features:
Microprocessor for the control of 16.7
million colours, can be controlled and
programmed with (optional) remote
control, 3 1500 mm RGB fluorescent
lamps, 58 W each, data bus connector/
power connection to control slave mo-
dules.
Slave module connection up to 3200 VA,
depending on power supply.
LIGHTBRUSH
®
Slave-Module 1500:
Item No. 09916300
Colour Light Module
without
Control Unit
Type: RGB 1500 / Slave
W/H/D: 1546 x 87.5 x 153 mm
Housing: Alu-polished
Weight: 4.0 kg
Rated Power (Consumption): 180 VA
Features:
3 1500 mm RGB fluorescent lamps, 58
W each, data bus connector/power
connection for the operation of additio-
nal slave columns,
without
control unit
and remote control.
Changing the Battery
The universal remote control operates with a
commercial 9 V block battery
. Open
the battery compartment on the back of the remote control and replace the old
battery with a new one.
Cleaning the Unit
Only the exterior of the unit may be cleaned. For interior cleaning, please contact an
authorized technician or ship the unit to the manufacturers factory.
Housing Exterior:
Clean the exterior with a dry, soft cloth. Do not use cleaning solutions
such as alcohol since this could damage the colour. Do not use compressed air,
sprays or similar means.
