2
Protect units against humidity.
Operate LIGHTBRUSH
®
RGB modules only within dry, closed premises.
Do not use faulty cables.
Make sure you disconnect the power plug before cleaning or opening the unit, or
before changing lamps.
In case of unexpected failure, unplug unit and have it examined.
All Units should be serviced by a qualified technician only.
Use only parts and accessories approved by DERKSEN
®
Light Technology.
Install the units only on firm, flat surfaces. Before their first use, the RGB
modules must be secured with screws to a floor, wall or ceiling.
Safety Precautions
1
User Instructions for
Lightbrush
®
rgb-Module / RGB-Cube
Before switching the unit on for the first time, please read these instructions and
keep them in a safe place!
Table Of Contents
Safety Precautions ............................................................................. 2
Installation and Connection .............................................................. 3
Wall, Floor or Ceiling Installation ......................................................... 3
Cable Connection and Routing ............................................................ 4
Plug Designations for Data/Power Connections .................................. 4
LIGHTBRUSH
®
Slave Unit Operation .................................................. 5
LIGHTBRUSH
®
Infrared Receiver ........................................................ 5
How to Configure Lightbrush
®
for Evenly Distributed Illuminations ................................................. 6
Formular for the Illumination of
Light Areas, Light Walls, Light Ceilings etc. ........................................ 9
Operation and Programming ............................................................ 8
Basic Features ..................................................................................... 8
Preset Programs (Factory Settings) .................................................... 9
Modification of Preset Programs ........................................................ 10
Creating Custom Colour Sequences ............................................. 11/12
DMX 512 control (optional) ........................................................ 13/14
Replacing the Fluorescent Lamps ................................................. 15
Changing the Battery (Remote Control) ........................................ 15
Cleaning the Unit ............................................................................. 15
Technical Specifications ....................................................... 16/17/18
