Se�ng up and opera�ng
En
gli
sh
30 / 56
Derksen Lich�echnik
WARNING! Risk of burns!
You can burn yourself on projector parts which have become hot.
▶
Let the device cool for at least 10 minutes before any set-up work.
WARNING! Op�cal radia�on hazard!
Op�cal radia�on can cause temporary or permanent eye damage.
▶
Never stare directly into the beam of light.
3.
Loosen and remove the two cylinder head screws of
the stop.
4.
Rotate the stop by 180°.
5.
Fix the stop in place with the two cylinder head screws.
5.3. Adjus�ng the focus of the mo�f
1.
Loosen the knurled screw.
2.
Move the projec�on lens within the holder un�l the
mo�f is in focus.
3.
Tighten the knurled screw.
5.4. 360° rota�on of the projector head
The projector head axis has a mechanical stop to prevent
damage to the cable. You can move this stop to reach any
possible rota�onal posi�on:
1.
Loosen the cylinder head screws of the locking device
(see 5.2) by a maximum of one turn.
2.
Turn the projector head to the posi�on shown here
and do not move it again un�l the stop is firmly in place
once again.
