www.dericam.com-
Shenzhen Dericam Technology Co.,Ltd
The camera should be kept in a cool, dry place away from direct sunlight, flammable materials,
explosive substances, etc.
This product should be transported, stored, and used only in the specified environments as
stated above.
Do not aim the camera at a strong light source, as it may cause overexposure of the picture,
and may affect the longevity of the camera’s sensors.
Ensure that the camera is in a well ventilated area to prevent overheating.
Operation and Maintenance
Do not touch the camera sensor or lens directly.
To clean dust or dirt off of the lens, use an air blower or a microfiber cloth.
Accessories
Be sure to use only the accessories recommended by manufacturer.
Before installation, please open the package and check to ensure that all of the components
are present.
Contact the retailer that you purchased from, or Dericam directly if anything is broken or
missing in the package.
Check Hardware
When you receive the product in the packaging, unpack it, and check all sides of the
product for any physical damage. The protective materials used in the packaging of the
product can protect most accidental damage during transportation, but to ensure that your
equipment is operating as expected, it is recommended to inspect the product before
proceeding further.
On the product, check specifically that the label on the bottom of the product is not
damaged. The serial number of the unit is often needed to provide support.
Please check that all required items for your camera are present and accounted for. If any
item is missing, please contact us as soon as possible so we can send you the missing
component.
Note
: Hardware does not look exactly as pictured in this section, but the steps to
assemble the hardware are the same.
