Dericam M501W, Руководство пользователя

Страница: 6 / 20

Shenzhen Dericam Technology Co.,LTD M501W User Manual
www.dericam.net Copyright @ Shenzhen Dericam Technology Co., Limited tech@dericam.com
6
4.2.2 Section 2 Image Parameters Settings

Flip & Mirror
You can flip the image by enabling Flip button, or mirror the image by enabling Mirror button.

Resolution
1) 320x240-------QVGA
2) 640x480-------VGA
There are two resolutions, the bigger one (VGA) is 640x480 pixels, and the smaller one (QVGA) is 320x240 pixels.
The bigger the resolution, the better of the image quality is, but the lower the frame rate is. If you are accessing the
camera via internet and want to get more fluent video streaming, please select resolution QVGA 320x240.

Frequency
1) 50HZ ---------Indoor surveillance (Region: Europe, China)
2) 60HZ ---------Indoor surveillance (Region: USA, Canada)
3) Outdoor-------Outdoor surveillance (Region: All over the world)
There are three options within the menu of Frequency, 50HZ, 60HZ and Outdoor. It depends on the frequency of the
electricity and surveillance model (indoors & outdoor). Please choose outdoor mode, when the camera was installed
outside.

Frame Rate
1) Max---------- Maximum frame rate
2) 20fps, 15fps, 10fps, 5fps, 1fps------- customized frame rate
You can choose option within the menu of Frame Rate to adjust the frame rate. It is often used in LAN network when
you want to lower the frame rate, so that you can save more bandwidth.

OSD Date/Time
1) Disable---------- Disable On-Screen-Display
2) Black, red, yellow, white, blue-------- enable On-Screen-Display with different color.
3) On-Screen-Display information------ Device name & Date & Time

ADD OSD Date/Time
1) Enable----------- Add date & time information on the surveillance screen when recording
2) Disable----------- Cancel date & time information on the surveillance screen when recording

Brightness
Default parameter is 6, you can adjust the brightness of the image by clicking plus or minus button.

Contrast
Default parameter is 4, you can adjust the contrast of the image by clicking plus or minus button.

Default
Click Default to restore factory parameters