Derbi GP1 50 cc, Руководство по ремонту

Страница: 33 / 138

32
C
HECKING THE IGNITION TIMING
Adjust the control cables:
Mixer cable: see “Mixer timing” procedure, below.
Throttle cable:
Adjust the screw on the carburettor so that there is no play
on the sheath.
Splitter control cable:
Adjust the screw on the throttle grip on the handlebar so that
there is no play on the twist grip.
All cables must be adjusted so that there is no play on their
sheaths.
Mixer timing
- Adjust via the transmission screw on the crankcase, with
the throttle cable released, the reference machined on the
rotating plate which must be aligned to that shown on the
mixer body as indicated in the figure.
While performing this operation the engine must be fed with
a 2 oil-fuel mixture (at least 0.5 litres if the tank is empty).
CAUTION
WHEN RUNNING OUT OF OIL OR REMOVING THE OIL
TANK, FOLLOW THE MIXER BLEEDING OPERATIONS AS
FOLLOWS: REFILL THE OIL TANK, WITH THE MIXER FITTED
ONTO THE ENGINE, AND THE ENGINE NOT RUNNING,
DETACH THE MIXER TUBE FROM THE CARBURETTOR AND
LOOSEN THE BLEED SCREW (SEE ARROW IN FIGURE) UN-
TIL OIL STARTS FLOWING OUTWARDS. RECONNECT THE
INLET TUBE TO THE CARBURETTOR, FIXING IT WITH THE
APPROPRIATE METALLIC CLAMP.
Recommended products
Synthetic oil that passes API TC ++ specifications
C
HECKING THE IGNITION TIMING