INDUSTRIAL VACUUMS
Mini BULL - TB
USE AND MAINTENANCE MANUAL
Mini Bull - TB Manual
page 35 of 41 pages
- remove the fastening clamp (H); detach the filter from its support and use a pair of scissors to cut the
lower wires that lock it to the shaker cage.
-
remove the filter, place it inside a plastic bag, close it and
dispose of it in compliance with
the laws in force
, according to the extracted material.
To assemble the new filter
, proceed in reverse order:
- insert the filter into its support ring, locking it by means of the fastening clamp (H)
- lock the filter to the cage tying the wires on its lower side.
- insert the filter complete with ring and cage into the vacuum, paying attention to the alignment of the
cage with the filter shaker lever
- insert the end of the lever into place inside the cage, insert the pin and fastening clip
- insert and lock the container into position
- place the head on the filter chamber (possibly after adding the band with the HEPA filter)
- lock the two fastening latches (C)
- connect the power supply
- turn the vacuum on, checking its operation.
USE ONLY GENUINE DEPURECO FILTERS
