INDUSTRIAL VACUUMS
Mini BULL - TB
USE AND MAINTENANCE MANUAL
Mini Bull - TB Manual
page 13 of 41 pages
• Never put your hands inside the container's positioning guides: movement of the lifting handle can cause
crushing of the fingers.
• Extensions, press-fit plugs and adapters are prohibited.
• Do not climb on the vacuum.
• Do not touch electric wires, switches, buttons, etc., with wet hands.
• Periodically verify the integrity of the power cord.
• When using the industrial vacuum, some components (motor terminal box, motor body in particular) can
reach high temperatures.
• During the operations to restore original work conditions, the personnel in charge must ensure at the end
of the procedure, normal operating and safety conditions of the vacuum and, in particular, of the safety
devices and protective guards involved in the operation.
• In the event that the Customer installs a tool not supplied by DEPURECO on the vacuum, it is essential to
verify that the safety requirements of Machinery Directive 2006/42/CE are met, notwithstanding that
DEPURECO shall not be held liable for problems caused by the use of that part.
• Structural damage, alterations or improper repairs can modify the protective capacity of the vacuum,
thereby nullifying this certification and releasing DEPURECO from any liability.
• This manual must always be kept at hand for consultation on the operating cycle and for clarifying any
doubts.
• In the event it is lost or damaged, request another copy from DEPURECO.
Attention!
This vacuum can contain harmful dust.
Emptying and maintenance procedures, including the disposal of the dust collection
containers, must be carried out only by specialised personnel wearing suitable
personal protective equipment.
Do not activate without a complete filtering system.
2.3
Safety plates and symbols
Plates with safety symbols and messages are applied to the vacuum and its packaging.
These pages show their precise location and the nature of the hazard.
Attention!
Ensure that all safety messages are perfectly legible.
Clean them with a cloth, water and soap. Do not use solvents, naphtha or petrol.
Replace damaged plates requesting them from DEPURECO.
In the event that a plate is located on a piece that is replaced, ensure that
a new plate is affixed to the new piece.
