INDUSTRIAL VACUUMS
Mini BULL - TB
USE AND MAINTENANCE MANUAL
Mini Bull - TB Manual
page 32 of 41 pages
Attention!
If working with the power on is absolutely necessary, when provided by Legislative
Decree 81/08, the maintenance technician must remain at a safe distance, have stop
buttons at hand and must never place his hands into the discharge volume.
Upon completing the intervention and before starting up again, the maintenance technician must verify the
efficiency of the safety devices and the integrity of the protective guards.
Interventions on the motors or on other electrical components must only be carried out by the specially
trained electrical maintenance technician authorised by the Safety Manager.
Attention!
After every maintenance operation, the Safety Manager is obliged to ensure the safety
conditions of the vacuum and its protection devices.
Before every work shift
-
Check that the power cord and plug are not damaged:
replace immediately if it shows signs of wear, using
a cable of the same type (information c/o DEPURECO) - this operation requires the skills of an electrician.
-
Ensure the integrity of the safety symbols (pictograms) applied to the vacuum.
-
Ensure that the refuse collection container is empty and properly locked under the vacuum.
-
Ensure the correct performance of the filter by checking the indicator or the vacuum gauge.
-
Ensure the integrity of the suction hose and of the accessories to be used.
Attention!
A perforated hose reduces suction power and disperses dust in the air.
