To put the new filter in,
proceed in reverse order
:
-
insert the filter into its support ring, locking it by means of the fastening clamp (H)
-
lock the filter to the cage tying the wires on its lower side.
-
insert the filter complete with ring and cage into the vacuum, paying attention to the alignment of the cage with
the filter shaker lever
-
insert the end of the lever into place inside the cage, insert the pin and fastening clip
-
insert and lock the container into position
-
place the head on the filter chamber (possibly after adding the band with the HEPA filter)
-
lock the two fastening latches (C)
-
connect the power supply
-
turn the vacuum on, checking its operation.
USE ONLY GENUINE DEPURECO FILTERS
