•
In the event that the Customer installs a tool not supplied by DEPURECO on the vacuum, it is essential to verify
that the safety requirements of Machinery Directive 2006/42/CE are met, notwithstanding that DEPURECO shall
not be held liable for problems caused by the use of that part.
•
Structural damage, alterations or improper repairs can modify the protective capacity of the vacuum, thereby
nullifying this certification and releasing DEPURECO from any liability.
•
This manual must always be kept at hand for consultation on the operating cycle and for clarifying any doubts.
•
In the event it is lost or damaged, request another copy from DEPURECO.
Attention!
This vacuum can contain harmful dust.
Emptying and maintenance procedures, including the disposal of the dust collection containers, must be
carried out only by specialised personnel wearing suitable personal protective equipment.
Do not activate without a complete filtering system.
2.3
Safety plates and symbols
Plates with safety symbols and messages are applied to the vacuum and its packaging.
These pages show their precise location and the nature of the hazard.
Attention!
Ensure that all safety messages are perfectly legible.
Clean them with a cloth, water and soap. Do not use solvents, naphtha or petrol.
Replace damaged plates requesting them from DEPURECO.
In the event that a plate is located on a piece that is replaced, ensure that
a new plate is affixed to the new piece.
