2.2 Safety recommendations
WARNING!
The following information is essential in view of preventing all
hazards that may occur while the vacuum cleaner is running.
However, they cannot replace the expertise and common sense of
operators as an overall framework for the prevention of accidents.
Structural damage, alterations or improper repairs can modify the
protective capacity of the vacuum, thereby nullifying this
certification and releasing DEPURECO from any liability.
Each section lists further safety measures specific to the various
functions.
ATTENZIONE!
WARNING!
Setting to work – connection to the power supply
•
Make sure there is no evident sign of damage to the vacuum cleaner before
starting work.
•
Before plugging the vacuum cleaner into the electrical mains, make sure the
voltage rating
indicated on the data plate corresponds to that of the electrical mains.
•
Plug the vacuum cleaner into a socket with a correctly installed ground
contact/connection.
Make sure that the vacuum cleaner is turned off.
•
The plugs and connectors of the connection cables must be protected against
splashes of
water.
•
There are antitastic wheels
•
Check that the vacuum cleaner is properly connected to the electrical mains.
•
Use the vacuum cleaner only when the cables that connect to the electrical mains
are in perfect condition (damaged cables could lead to electric shocks!).
•
Regularly check there are no signs of damage, excessive wear, cracks or ageing
on the electric cable.
WARNING!
When the vacuum cleaner is operating, do not:
•
Crush, pull, damage or tread on the cable that connects to the electrical
mains.
•
Only disconnect the cable from the electrical mains by removing the plug (do
not pull the
cable).
•
Only replace the electric power cable with one of the same type as the original:
H07 RN - F. The same rule applies if an extension is used.
•
The cable must be replaced by the manufacturer’s Service Centre staff or by
equivalent qualified personnel.
The manual must accompany the vacuum cleaner in case of resale.
Содержание A1086
Страница 35: ... Remove the head with its base ...
Страница 40: ......