DEPURECO A1086, Инструкция по эксплуатации и техническому обслуживанию

Страница: 31 / 40

4.5 Storage – Decommissioning
Remove the filter and clean it; empty the refuse collection container and store the
vacuum in a place protected against weather agents with the temperature ranging
between 5 and 45 °C and cover it with a nylon tarp to protect it against dust.
5. MAINTENANCE SECTION
Warning!
Special vacuum maintenance must be carried out solely by
specialised technicians authorised by the DEPURECO dealer.
5.1 Informative notes
This section describes the checks and routine maintenance operations required to
ensure proper vacuum operation.
Maximum reliability and minimum maintenance costs are the result of a planned
maintenance and inspection schedule carefully followed throughout the entire lifespan
of the vacuum.
Observe the set maintenance intervals and schedule the interventions according to
specific requirements in relation with the vacuum production cycle.
Always use perfectly working tools specifically intended for the operation to be carried
out; the use of inadequate or inefficient tools can cause severe damages.
Any other intervention required to remove faults or malfunctions must be expressly
authorised by the manufacturer.
In these cases, always communicate the vacuum identification data - see para. 1.4 of
this manual.
For significant repairs, refer to the authorised dealer, whose specialised personnel has
the technological expertise and is always available for prompt interventions.
For user maintenance operations, the vacuum must be disassembled, cleaned and
maintained, where possible, in such a way as to prevent hazards to the maintenance
personnel and to third parties. Suitable precautionary measures include
decontamination before dismantling, measures for filtered forced ventilation of the room
where the appliance is disassembled, cleaning of the maintenance area and suitable
personal protection equipment.
Once every three months (or more frequently, according to the operating cycle and the
conditions of use), the manufacturer or a qualified technician must check the filters,
ensuring that they are not damaged; the tightness of the air system and proper operation
of the control devices.