Deprag 330EG36-0012, Руководство по эксплуатации

Страница: 20 / 32

20
11 Error display and troubleshooting
11.1. System error
If you discover that the MINIMAT–ED screwdriver is defective, please send it to DEPRAG.
Please do not try to troubleshoot or rectify any electrical fault on your own under any cir-
cumstances whatsoever.
Number Error description / Troubleshooting
001
Temperature too high!
Check the screw assembly process and adjust if required. If necessary please con-
tact the DEPRAG service department.
002 - 011
No troubleshooting available, the screwdriver must be returned for inspection.
Please contact the DEPRAG service department.
… reserved
100
Switch the MINIMAT
®
–ED screwdriver off and on again. If the error remains please
contact the DEPRAG service department.
101 - 103
Make sure that the drive of the ED screwdriver can move freely. Restart the
MINIMAT
®
–ED screwdriver.
104 - 105
No troubleshooting available, the screwdriver must be returned for inspection.
Please contact the DEPRAG service department.
106
Temperature too high!
Check the screw assembly process and adjust if required. If necessary please con-
tact the DEPRAG service department.
107 - 143
No troubleshooting available, the screwdriver must be returned for inspection.
Please contact the DEPRAG service department.
… reserved
201 - 203 Contact the DEPRAG service department.
204 - 206
No troubleshooting available, the screwdriver must be returned for inspection.
Please contact the DEPRAG service department.
207 - 208 Contact the DEPRAG service department.
… reserved
301 - 308
Switch the MINIMAT
®
–ED screwdriver off and on again. If the error remains please
contact the DEPRAG service department.
… reserved
Tables 6: System error