Deprag 330EG36-0012, Руководство по эксплуатации

Страница: 11 / 32

7 Operation
7.1. Operating element
function buttons
status LEDs
7 segment display
Illustration 6 – Operating element
7.1.1 Status LEDs
Colour Name Nomenclature
green Status OK last screw assembly OK
red
Status NOT
OK last screw assembly NOT OK
Tables 2: Status LEDs
IMPORTANT
If both LEDs flash at the same time program selection is selected on the
screwdriver.
When moving into the settings menu both LEDs switch off.
7.1.2 Function buttons
Symbol Description Meaning
Start Start screwdriving program (only if the screwdriver is set to but-
ton start, see ...link)
Reversal Change between assembly and loosening programs. For every
one of the 5 screw assembly programs (programs 1-5) there is
a corresponding loosening program (programs 6-10).
Program se-
lection / Menu A short press of the button moves into the program selection
torque setting, a long press of the button moves into the set-
tings menu.
A long press of the button is indicated by a line in the upper
edge of the display (
¯ ¯ ¯ ).
Tables 3: Function buttons
11