Notice SecurAccess PMR
40
Example N°1:
A list of 5 numbers stored. Repeated dial selection is 9. In case of busy tone and (or) no answer, the
SecurAccess will dial 10 times the list of 5 numbers (1 first trial plus 9 repeated trials).
Example N°2:
A list of 3 numbers stored. Repeated dial selection is 0. In case of busy tone and (or) no answer, the
SecurAccess will dial one time the list of 3 numbers and will hang up.
3.9. Ringer
3 levels adjustment: off-low-high and 3 melodies selection. Adjust as shown:
Setting to modify
Code
Setting choice
Factory settings are shown in grey
Conf
Ringer level
0 3
Low : 0 - High : 1
*9
Ringer melody
0 4
0 : ringer off
1 : Melody N°1
2 : Melody N°2
3 : Melody N°3
*9
3.10. Automatic answering
An auto answer mode can be activated for calling a party standing close to the SecurAccess or to
enter the remote programming mode. The SecurAccess will automatically go off-hook after a pre
programmed number of rings:
-
From 1 up to 9 rings when automatic off-hook selection is activated After 30 rings otherwise.
Setting to modify
Code
Setting choice
Factory settings are shown in grey
Conf.
Auto answer
0 5
Enter the number of rings before auto answer (0 up to 9)
Note: 0 = feature deactivated
3 = factory setting
*9
3.11. Door latch activation and power schematic
The SecurAccess is fitted with two NO/NC driving contacts for a remote activation of a door latch
electrical relay.
Following settings can be chosen by local or remote programming:
1. Activation or deactivation of door latches
2. Activation duration
3. 4 digits access code selection (up to 6 different access codes, Note: 0000 will not work)
4. Fast opening selection for the door latch n°1
Setting to modify
Code
Setting choice
Factory settings are shown in grey
Conf.
Door latch N°1activation
6 0
0 : remote and local activated (factory setting)
1 : remote and local deactivated (Door latch not active)
2: remote activated and local deactivated
3: remote deactivated and local activated
*9
Activation duration door latch N°1
6 1
Enter the number of seconds (from 1 up to 9 seconds).
factory setting = 2 seconds
*9
1
st
access code door latch N°1
6 2
Enter a 4 digits code, (0000 not allowed)
*9
2
nd
access code door latch N°1
6 3
Enter a 4 digits code, (0000 not allowed)
*9
3
rd
access code door latch N°1
6 4
Enter a 4 digits code, (0000 not allowed)
*9
4
th
access code door latch N°1
6 5
Enter a 4 digits code, (0000 not allowed)
*9
