© Henri DEPAEPE SAS - France
9
3.5
Handset name
The handset name can be changed by selecting menu
“Settings → Handset name”
. An editor is displayed
when entering the menu. The handset name is typed in by using the numeric keys and afterward saving the
name. The handset name is displayed on the idle display.
3.6
Reset settings
The handset name can be reset to default settings by selecting menu
“Settings → Reset settings”
. The base
is not reset to default when selecting this feature. The handset is still registered after a reset.
3.7
Status
The menu
“Settings → Status”
delivers some useful information to the end user. The displayed
information’s are:
3.8
Auto answer
The feature can be selected via menu
“Settings → Auto answer”
.
“… → Normal”
The user must always press “Green-key (Off-hook) to answer a call. The call is not answered by removing the
handset from the cradle/charger.
“… → Any Key”
Pressing any key will answer an incoming call. The call is not answered by removing the handset from the
cradle/charger.
“… → Automatic”
If the feature “Automatic” is enabled on the handset, then the incoming call is answered automatic after 5
seconds.
3.9
Silent charging
The feature “Silent charging” can be set by selecting menu
“Settings → Silent charging”
. Handset must be
placed in charger in order to work as mentioned below. The options of silent charging are:
“… → Off”
The handset is ringing when receiving incoming calls (audio alert and incoming call screen displayed).
“… → Disconnect”
The handset doesn’t react on incoming call (no audio alert and no incoming call screen displayed).
“… → Silent”
The handset reacts on incoming call but the handset doesn’t ring (no audio alert but the incoming call screen
displayed).
Base station:
- Software version
- Hardware version
- IP address
- MAC address
- System name
Handset status:
- Software version
- Hardware version
- DECT band
- Battery level
- IPEI
