© Henri DEPAEPE SAS - France
4
1.4
Basic call transfer with Partner TX Antennas system
1 - While “Connected”, press the
”Hold”
option soft key.
2 - The call session is on hold.
3 - Then, enter the transfer destination number and press the
“Transfer”
option soft key.
The transfer process is not finished until the transfer target is reached, you can recover the call by
pressing the
“Retrieve”
option soft key.
4 - While the call session is established with transfer destination number, the handset
automatically returns to idle mode (On-hook).
NOTE : Using basic transfer mode,
transfer target’s contact informations are sent to the transferee.
His handset use it to attempt to call
target’s destination number. The provided contact can be used to
make new calls in the future.
1.5
Transfer a call to a 2
nd
call with Partner TX Antennas system
1 - While “Connected”, press the
“Hold”
option soft key.
2 - The first call session is on hold as handset
“line 1”
.
3 - Then, enter the transfer destination number and press the
Off-hook key.
4 - This establishes a second call session as handset
“line 2”
.
5 - While connected with “line 2”, you may press
“Transfer”
option soft key to transfer the first call
hold on line 1 to the second call established on line 2.
6 - While “line 1” and “line 2” are bridged, handset returns to idle mode (On-hook).
