© Henri DEPAEPE SAS - France
5
1.6
Call conference with Partner TX Antennas system
1 - While “Connected”, press the
“Hold”
option soft key to put the call session on hold as handset
“line 1”
.
2 - Then, enter the transfer destination number and press the
Off-hook key.
3 - This establishes a second call session as handset
“line 2”
.
4 - While connected with “line 2”, you may press
“Conf.”
option soft key to establish a conference
call between all dialed parties.
5 - The conference is owned by the first call session as handset “line 1”.
1.7
Handling 2 calls: Hold, Retrieve, Swap with Partner TX system
1 - While “Connected”, you can make a second call by holding the first one. Press the
“Hold”
option
soft key.
2 - The first call session is on hold as handset
“line 1”
. You can recover the call by pressing the
“Retrieve”
option soft key.
3 - Then, enter the transfer destination number and press the
Off-hook key.
4 - This establishes a second call session as handset
“line 2”
.
5 - While connected with “line 2”, you may press
“Swap”
option soft key to automatically hold the
second call and recover the first one. Press again to switch between lines 1 and 2.
6 – Ending the active call by pressing the
On-hook key automatically recovers the call on hold
as active. You have to press “Red-key” again to terminate this call.
