manualshive.com logo in svg

Denzel 952307, Руководство пользователя, Страница: 15 / 104

Поделиться
Скачать
Denzel 952307 Скачать руководство пользователя страница 15

15

GASOLINE CHAIN SAW 

EN

Pic. 18

Cross cutting

Sawing is performed across wood fibers. When working on an incline, make sure you are in a stable position 

and stand on the higher side of the slope with respect to the trunk. It is desirable that the trunk lay on supports, 

and the sawn end was not on the ground. Make sure that the chain does not crash into the ground, as this will 

cause quick chain wear. 

1

Pic. 19

With transverse sawing, the toothed stop 1 (Pic. 19) should be installed on the sawn log.

1.  In the case when the trunk is on supports along the entire length, drive the chain saw from top to bottom 

and at the same time make sure that the chain does not cut into the ground (Pic. 20).

2.  In the case where the trunk rests on the support at one end, first cut from the bottom to 1/3 of the trunk 

diameter to avoid splitting. Then finish the cut from above so that it coincides with the first cut, avoiding 

jamming (Pic. 21).

1

2

Pic. 20

Pic. 21

3.  In the case when the trunk is on supports from two ends, first cut from the top 1/3 of the trunk diameter 

to avoid splitting. After that, finish the bottom cut so that it coincides with the first cut, avoiding jamming. 

(Pic. 22).

For cutting into pieces, the trunk is best propped up with goats. If this is not possible, the trunk should be 

raised and laid on the logs. Make sure the barrel is firmly fixed.

Содержание 952307









































































































Отзывы:

Нет отзывов