Maillefer Instruments
CH – 1338 Ballaigues
Switzerland
ZF1902109.X / 03/ 2009 –updated 03/2011
5/36
Limitation of Remedies
In no event shall Endo Inventions or any of its affiliated parties be liable for any special, incidental or
consequential damages based upon breach of warranty, breach of contract, negligence, tort, or any
other legal theory. Such damages include, without limitation, loss of savings or revenue; loss of profit;
loss of use; the claims of third parties; and cost of any substitute equipment or services.
Warranty Restrictions
What is not covered under warranty?
•
Activator tips
•
Protective barrier sleeves
•
Damage caused by misuse, abuse, neglect or alterations
•
Normal wear and tear, including chips, scratches, abrasions, cracking, discoloration or fading
•
Replacement batteries*
* Special note: If the product is not going to be used for an extended period of time (two weeks or
longer), the battery should be removed.
The battery must also be removed during transport, for example when being sent for After Sales
Service.
8. GUIDANCE AND MANUFACTURER’S DECLARATION – ELECTROMAGNETIC EMISSIONS
The handpiece is intended for use in the electromagnetic environment specified below. The customer or the user of
the handpiece should assure that it is used in such an environment.
Emissions test
Compliance
Electromagnetic environment – guidance
RF emissions
CISPR 11
Group 1
The handpiece uses RF energy only for its internal function. Therefore,
its RF emissions are very low and are not likely to cause any
interference in nearby electronic equipment.
RF emissions
CISPR 11
Class B
Harmonic emissions
IEC 61000-3-2
Not applicable
Voltage fluctuations
/flicker emissions
IEC 61000-3-3
Not applicable
RF emissions
CISPR 14-1
Complies
The handpiece is not suitable for interconnection with other equipment.
