4
INSTALLATION INSTRUCTIONS:
Shipping damage should be reported to the carrier as soon as detected.
The Unit Package contains the following:
Owner & Operators Manual (this document)
Eclipse Processing Unit w/Power Cord
2 Spare Bulbs
Turntable
Gloves (1pr.)
10A Fuse (2) - (230V only)
4.0A Fuse (1)
UNPACKING:
Save the box and other packing material for future use in transporting the unit.
•
Open the box.
•
Remove accessory kit.
•
Carefully lift the unit from the box by lifting on packaging supports. Support unit from the bottom to prevent slipping.
•
Remove packaging supports.
•
Remove plastic bag.
INSTALLATION:
•
Remove remaining packing material on outside of unit.
•
Remove turntable from the top of unit.
•
Lift unit from packing supports by metal base only.
DO NOT LIFT UNIT USING PLASTIC SIDE COVERS.
•
Carefully place the unit on a solid flat surface. Position the unit at least 10cm (4 in) from the wall or other structures to
allow for good airflow.
•
Connect unit to a grounded power source.
•
Open door and install turntable onto motor shaft, match flat sides of shaft and turntable.
WARNING:
Never operate the Unit in close proximity to combustible materials or place materials on top of the unit.
Do not use extension cords with this equipment.
Plug the power cord into a circuit rated a minimum of 15A (100V & 120V) and 10A (230V).
Do not position the unit in a way that blocks access to the power cord inlet socket or the wall outlet.
