background image

 

17 

PRODUCT SERVICE: 

 

WARNING: 

This equipment is designed with safety features to protect the operator and must not be modified in any form.  Only qualified 
individuals should repair this piece of equipment.  Failure to observe these precautions may result in burns or electrical shock.

 

 

Three methods of product service are available: 

 

Telephone assistance available at the number listed below, 

 

Return the unit for servicing using the instructions below, 

 

Call DENTSPLY at the phone number below and obtain a service manual for a nominal fee 

 
BEFORE RETURNING THE UNIT: 

 

Call DENTSPLY for an PR number.  This is used to track and identify your unit.  Equipment received without this number 
may not be identifiable. 

 

Equipment damaged in shipment as a result of improper packing may not be paid by the carrier. 

 
DENTSPLY will not be responsible for damages resulting from improper packing. 
 
Ship prepaid to: 
DENTSPLY Prosthetics 
ATTN: Equipment Repair 
PR Number__________________ 
470 West College Ave. 
York, PA  17401 USA 
Phone: 800.835.6639 Option #1 (US Customers) 
717.849.4502 (International Customers) 
Fax: 717-849-4238 
Email: [email protected] 
 
Our European Representative is: 
DeguDent GmbH 
Rodenbacher Chaussee 4 
D-63457 Hanau-Wolfgang 
Germany 
Phone +49 6181 59 57 59 
Fax     +49 6181 59 59 62 

 
 
Disposing of the device: 

The device is an electronic device according to the “Act Governing the Sale, Return and Environmentally Sound Disposal of 
Electrical and Electronic Devices” (ElektroG). 
 
 
 
 
 
The device is not intended for private use.  It is manufactured and delivered for commercial use and is to be disposed by the end 
user according to the specifications of the Electrical and Electronic Equipment Act – ElektroG. 

 

 

 

 

 

It was identified in accordance with the existing law and provided with this symbol. 

 

Содержание ECLIPSE 9494800





















Отзывы: