Chapter 3 Bluetooth
Wireless Communication
3.1 Establishing Bluetooth
Wireless Link
To establish a Bluetooth
wireless link between the Bluetooth
®
adapter and the scanner (or some other Bluetooth
equipment), configure the Bluetooth
®
adapter as a slave (default) or master with the configuration software BA
Setting*.
Bluetooth
®
adapter as slave (default)
The Bluetooth
®
adapter is a slave by default. This slave can establish a Bluetooth
wireless link with the scanner or
some other Bluetooth
equipment as a master without special communication procedures.
Bluetooth
®
adapter as master
To use the scanner (or some other Bluetooth
equipment) as a slave, configure the Bluetooth
®
adapter as a master and
specify the slave's Bluetooth
address to the Bluetooth
®
adapter with the configuration software “BA Setting*”. The
connection ratio of the Bluetooth
®
adapter and slave device should be 1:1.
Note:
The scanner is automatically connected to the communication adapter via the SPP profile. The scanner
cannot be connected to the communication adapter using the HID profile.
* Registered users can download the device drivers and the configuration software “BA Setting” from QBdirect, their
customer support section on the Denso Wave website at no extra charge.
For further details on QBdirect or to register, visit the following URL.
8