
2.3.3 Setting up the USB interface
Connecting via USB keyboard interface
The USB keyboard interface requires the USB device class driver for HID (Human Interface Device) which is included
in Windows Operating Systems and whose setup wizard will automatically run. You do not need to install the device
driver.
Set up the Bluetooth
®
adapter in the following steps. The same setup procedure for Windows 7 described here also
applies to Windows8/8.1 and Windows Vista.
Setup procedure
(1) Switch the computer on to run Windows. Log on as an Administrator.
(2) Connect the scanner's USB interface cable to the computer or USB hub.
(4) Wait for the USB Human Interface Device hint to pop up on
the task tray.
(5) To check whether the USB device is working normally, open
the Windows Device Manager.
If USB Human Interface Device is added to the sub-tree of
Human Interface Devices as shown at left, the scanner is
connected normally.
If the device is not added or it is marked with or ,
remove this driver with the uninstaller, reboot your computer,
and perform the above connection process again.
4