Denso AT10Q-SM, Руководство пользователя

Страница: 76 / 113

66
Chapter 11 Parameters and Defaults
The tables below list the parameters and their defaults. Those parameters can be changed with the QR-coded
parameter menu or configuration software (ScannerSetting_2D), except shadowed ones only with the configuration
software.
When the scanner leaves the factory, all of these parameters are set to defaults.
(1) Reading mode related parameters
Items Parameters Defaults Refer to:
Regular read mode
√
n-point verification scan mode
Data verification read
2-point verification scan mode
Section 7.1
Non-edit mode
√
Data extraction mode
Data conversion (substitution) mode
Blocksorting mode
Data edit
ADF script mode
Section 7.2
Enabled
Point scanning mode
Disabled
√
Section 7.3
Double-read enabled
Period of double-read prevention
Period of double-read prevention
0.1 to 9.9 seconds
1 s
Chapter 4
(2) Interface to the host
Items Parameters Defaults Refer to:
RS-232C interface
√
(Note 1)
USB-COM interface
√
(Note 1)
Interface
USB keyboard interface (Note 2)
Chapter 9
(Note 1) Depending upon the interface plugged into the scanner, the scanner automatically switches to the RS-232C interface
or USB-COM interface.
(Note 2) Selecting the USB keyboard interface disables access to the configuration software (ScannerSetting_2D).
: Can be changed only with the configuration software.