Dension ice-Link: Plus, Руководство по установке

Страница: 8 / 15

8. Now is a good time to mount the DA Converter to the Amp. First, clean the
Amp surface and back of converter with degreaser.
9. Evenly space four 3M Dual Lock fasteners to the back of the converter and
mount to the amp as shown. Heavy Duty Velcro may work too?
10. With the converter mounted to the amp, now clean up the wires around the amp. Note the position of the
converter and especially how the filter neatly fits next to the amp plug. IGNORE the wire hanging down… it
tucks neatly behind the amp.
11. While in the trunk, take your 11/32 drill bit and carefully drill a hole adjacent to the large grommet hole (SEE
PHOTOS). Take your time and do not push too hard – drill just enough to break through. Clean up the rest
with the grinder attachment (Dremel Tool) BE SURE TO SMOOTH ALL ROUGH EDGES.
12. Go ahead and run the wiring harness through your newly created hole. DO NOT DRESS THE HARNESS
WIRES…THIS IS DONE AT THE END OF INSTALLATION.