Denon Professional DN-V100, Руководство по эксплуатации

Страница: 16 / 32

– 16 –
EN
DISC PLAYBACK
Getting started
• Turn on the power of the TV, amplifier and any other com-
ponents which are connected to the DVD player.
• Make sure the TV and audio receiver (commercially avail-
able) are set to the correct channel.
Press the POWER ON/OFF button.
• P-ON will appear briefly on the dis-
play panel.
Press the OPEN/CLOSE button
to open disc loading tray.
Place the disc on the tray, with
the label facing up.
Press the
PLAY button.
• The tray will close automatically, then playback will start
from the first chapter or track of the disc. If the playback
does not start automatically, press the
PLAY button.
• When you play back the DVD with a title menu, it may
appear on the screen. In this case, refer to “Title Menu”
on page 17.
Press the STOP button to stop playback.
NOTES:
• A “prohibited icon” may appear at the
top-right on the TV screen during opera-
tion, warning that a prohibited operation
has been encountered by the DVD play-
er or the disc.
• With DVDs that use some titles for playback pro-
gramme signals, playback may start from the second
title, or it may skip these titles.
• During the playback of two layered disc, pictures may
stop for a moment. This happens when the 1st layer
switches to the 2nd layer. This is not a malfunction.
• The operation may vary when you play back DVDs with
disc menu or Video CDs with PBC. Refer to the manual
accompanying the disc for details.
5
4
3
2
1
DivX ®
WMA JPEG MP3 VCD CD DVD
Press the MENU button.
• The DVD main menu will appear.
If the feature is not available, symbol may
appear on the TV screen.
If disc menu is available on the disc, audio
language, subtitle options, chapters for the title and
other options will appear for selection.
Press the
Cursor buttons (
L
/
K
/
B
/
s
) to select an
item, and the ENTER button to confirm the selection.
4
3
2
1
DVD
Basic Playback
Disc Menu
DVD may contain menus to navigate the disc and access
special features. Press the appropriate
Numeric buttons or
use the Cursor buttons (
L
/
K
/
B
/
s
) to highlight your
selection in the DVD main menu and press the ENTER but-
ton to confirm.
DVD
General Features
Insert a Video CD.
Press the
STOP button.
Press the Numeric buttons to enter the desired
Track number.
• PBC function is now cancelled and the playback of the
Video CD will start.
To call back PBC function, press the STOP button
twice, and then press the PLAY button.
• The title menu will appear on the TV screen.
4
3
2
1
VCD
CANCELLING AND CALLING BACK PBC FUNCTION
Press the DIMMER button on the front panel to
select the desired brightness of the front panel dis-
play. (BRIGHT, DIMMER or OFF)
• The default setting is BRIGHT.
NOTES:
• The brightness of the front panel display can be adjust-
ed from the setup menu. Details are on page 28.
• When you turn on the power next time, the brightness
of the front panel display will be as set in setup menu.
1
Brightness of the Front Panel Display
NOTE:
• Unless otherwise stated, all operations described are
based on remote control use. Some operations can be
carried out using the menu bar on the TV screen.
HDMI Setup
Press the HDMI button on the front panel to select
the HDMI output mode.
The output mode changes as follows every time
the
HDMI button is pressed.
• The HDMI indicator on the front panel lights up when
HDMI output mode is on.
480P/576P
(Default):
Video output from the HDMI OUT jack at 480p/576p.
720P: Video output from the HDMI OUT jack at 720p.
1080: Video output from the HDMI OUT jack at 1080i.
OFF: No video output from the HDMI OUT connector.
1
1080 OFF 480P/576P
720P
NOTES:
• Video and audio signals may distorted temporarily
when switching to/from the HDMI output mode.
• Use a display equipment with an HDMI-compatible port.
• The unit is sending Progressive video signal and HDMI
signal simultaneously when HDMI mode is set to ON. If
you connected component video cable to your TV,
which is not compatible with progressive scan, the dis-
torted picture will be output.
• The HDMI indicator on the front panel flashes when you
select the HDMI output mode but there is no HDMI cable.
• You can check the HDMI connection status by pressing
the DISPLAY button during playback with the HDMI
output mode (refer to page 24).
• If the TV is not compatible with newly selected HDMI
output mode, the actual output mode will be kept the
one before changing the selection. When this occurs,
the newly selected mode will appear on the front panel
display (see page 11) while the actual output resolution
will be indicated by performing the on-screen display as
described in NOTE FOR HDMI DISPLAY on page 24.
• You cannot select the HDMI output mode when the
setup menu is on the TV screen.