ENGLISH
6
Pitch bend mode:
When the jog dial is turned, the playing speed
changes at a fixed rate. (The “
” is displayed.)
Plat-H mode:
When the jog dial is turned, the playing speed
changes in function of the speed at which the
jog dial is turned. (The “
” is displayed.)
When the PLAT-H mode is selected, the
PLAT-S mode is also set at the same time.
!3
TRACK button
•
This button selects the track to be played.
•
Each press of this button chages 1 track.
•
Continuing to hold this button down provides
an automatic change at a higher speed which is
convenient for discs that contain many tracks.
!4
CUE button
•
Pressing the CUE button during play provides a
return to the position at which play was started.
Alternately pressing the PLAY/PAUSE button
and the CUE button allows the CD to be played
from the same position any number of times.
•
The CUE LED lit, when the standby mode is
set.
•
When in the sleep mode, cancel the sleep
mode.
•
When the unit is in the standby mode, stutter
playback is available.
!5
PLAY/PAUSE button (
13
)
•
Use this button to start playback.
•
Press once to start playback, once again to set
the pause mode, and once more to resume
playback.
•
In the PLAT-S mode, press this button to plat-
start and plat-stop.
!6
PITCH BEND +/– button
•
The playing speed increases/decreases while
this button is pressed.
•
When the button is released, the playing speed
returns to the previous speed.
!7
Pitch slider
•
Use this to adjust the playing speed.
•
The playing speed decreases when slid
upwards and increases when slid downwards.
!8
PITCH button
•
Press this button to switch to the play speed
set with the Pitch slider. The PITCH LED lights.
•
When the button is pressed again, the fixed
pitch mode is set and the PITCH LED flashes.
•
Press the button again to cancel the pitch play
mode and return to normal speed.
!9
TIME button
•
Press this to switch the time display between
the elapsed time or remaining time per track or
per disc.
•
ON or OFF of the Auto Cue function can be
selected, pressing the button for more than 1
second.
@0
Display
•
See page 6.
@1
Shuttle dial (outer side)
•
The shuttle dial can be used in the search and
bend mode.
•
Use this dial to select the scanning direction
and speed.
•
The disc is scanned in the forward direction when
the shuttle dial is turned clockwise from the
neutral position, and in the reverse direction
when the shuttle dial is turned counterclockwise.
•
The scanning speed increases as the wheel is
turned further.
@2
Disc holder OPEN/CLOSE button
•
Press this button to open and close the disc
holder.
•
The disc holder will not open during playback.
Stop playback before pressing this button.
(4) RC-47 Rear Panel
@3
Control connector
•
Connect this connector to the REMOTE
connector on the DN-1800F (main unit) using
the included control cord.
(5) Display
q
Jog mode indicator
•
“
” is displayed when in the bend mode at
the jog dial.
•
“
” is displayed when in the platter mode at
the jog dial.
•
Indicator turned off when the search mode is
selected at the jog dial.
w
Bar indicator
•
This provides a visual indication of where the
pickup is within the currently playing track.
e
Pitch display
•
This indicates the playback speed (pitch).
(–10.0 to +10.0)
r
2
indicator
•
Indicator lights when the Auto Cue function is
set.
t
indicator (End of message)
•
See page 8.
y
Play mode indicators
•
“SINGLE” lights when in the single track play
mode.
•
“CONTINUE” lights when in the continuous
play mode.
•
“SINGLE” flashes when in the single relay play
mode.
•
“CONTINUE” flashes when in the continuous
relay play mode.
u
Time mode indicators
•
When the TIME button is pressed, the time
display switches as follows:
When “ELAPSED” is lit:
The track’s elapsed time is displayed.
When “REMAIN” is lit:
The track’s remaining time is displayed.
When “T.” and “ELAPSED” are lit:
The disc’s total elapsed time is displayed.
When “T.” and “REMAIN” are lit:
The disc’s total remaining time is displayed.
1. Precautions on handling compact discs
•
Do not allow fingerprints, oil or dust to get on the
surface of the disc.
If the disc is dirty, wipe it off with a soft dry cloth.
•
Do not use benzene, thinner, water, record spray,
electrostatic-proof chemicals, or silicone-treated
cloths to clean discs.
•
Always handle discs carefully to prevent
damaging the surface; in particular when
removing a disc from its case or returning it.
•
Do not bend the disc.
•
Do not apply heat.
•
Do not enlarge the hole in the center of the disc.
•
Do not write on the label (printed side) with a
hard-tipped implement such as a pencil or ball
point pen.
•
Condensation will form if a disc is brought into a
warm area from a colder one, such as outdoors in
winter. Do not attempt to dry the disc with a hair
dryer, etc.
2. Precautions on storage
•
After playing a disc, always unload it from the
player.
•
Always store the disc in the jewel case to protect
from dirt or damage.
•
Do not place discs in the following areas:
1) Areas exposed to direct sunlight for a
considerable time.
2) Areas subject to accumulation of dust or high
humidity.
3) Areas affected by heat from indoor heaters,
etc.
4
COMPACT DISCS
i
Track, minute, second and frame displays
•
These displays indicate information on the
current position and time.
