9
SPECIFICATIONS
2
GENERAL
Type:
Twin mechanism compact disc player with wired remote control
Disc type:
Standard compact discs (12 cm and 8 cm discs)
Dimensions:
Player unit:
482 (W) x 88 (H) x 252 (D) mm (without feet)
Remote control unit:
482 (W) x 88 (H) x 62 (D) mm (without feet)
Installation:
19-inch rack mountable
Player unit:
2U
Remote control unit:
2U
Weight:
Player unit:
6 kg
Remote control unit:
1.5 kg
Power supply:
U.S.A., Canada and Taiwan R.O.C. models: 120 V AC
±10%, 60 Hz
European models:
230 V AC
±10%, 50 Hz
Power consumption:
17 W
Environmental conditions:
Operational temperature:
5 to 35°C
(41 to 95°F)
Operational humidity:
25 to 85%
(no condensation)
Storage temperature:
–20 to 60°C (4 to 140°F)
2
AUDIO SECTION
Quantization:
16-bit linear per channel
Sampling frequency:
44.1 kHz at normal pitch
Oversampling rate:
8 times
Frequency response:
20 to 20,000 Hz
Analog output
Output level:
2.0 V
Digital output
Signal format:
SPDIF
Output level:
0.5 Vp-p 75
Ω
/ohms
Load impedance:
10 k
Ω
/kohms or more
2
FUNCTIONS
Instant start:
Within 30 msec.
Variable pitch:
±10% or more
Pitch bend:
±32% or more
Search precision:
1/75 sec. (1 subcode frame)
Max. scan speed:
Over 20 times normal speed
✽
Specifications and design are subject to change without notice for purpose of improvement.
8
CLEANING THE OPTICAL PICK–UP LENS
Necessity of cleaning might be differed on location and frequency of use each player.
It is recommend to clean the pick–up lens once a week.
We recommend using DENON’s AMC–22 PICK–UP LENS CLEANER.
7
OTHER FUNCTIONS
ENGLISH
8
(1)
SINGLE RELAY MODE
★
The unit can play CD1 and CD2 alternately.
1. Relay play
1
Press the CONT./SINGLE button several times
until “SINGLE” indicator flashes on the
display.
•
When the play finish the desired track, another
CD will be started the play.
•
When both CD1 and CD2 set to the SINGLE
RELAY mode, endless play are available to
the each track of CD1 and CD2 alternately.
(2)
CONTINUOUS RELAY MODE
1
Press the CONT./SINGLE button several times
until “CONTINUOUS” indicator flashes on the
display.
•
When the play finish the final track of disc,
another CD will be started the play.
•
When both CD1 and CD2 set to the
CONTINUOUS RELAY mode, endless play
are available to the each disc of CD1 and CD2
alternately.
(3)
COMBINED WITH SINGLE,
CONTINUOUS, SINGLE RELAY
AND CONTINUOUS RELAY MODE
1
The combination with RELAY PLAY mode and
SINGLE, CONTINUOUS PLAY mode, or SINGLE
RELAY and CONTINUOUS RELAY PLAY mode
are also available.
For example:
When CD1 is set to the CONTINUOUS RELAY
PLAY mode and CD2 is set to the CONTINUOUS
PLAY mode.
•
When start the play from CD1, play can be
stopped after play the final track of CD2.
2. Auto Cue
1
Press the TIME button more than 1 second,
ON/OFF selection of the audio level detection
of hedding track is available. (The Auto Cue
ON status at the power on.)
•
When the power on status, “
2
” indicator
displayed.
3. Disc Holder Auto Close
1
Disc holder will automatically close after 30
seconds or so have elapsed in the disc open
mode.
4. End of Message
1
To notify the track end during the play mode,
“
” indicator starts the flashing when there
are less than 30 seconds remaining to the
track end.
