Denon DMD-F101, Руководство по эксплуатации

Страница: 28 / 36

28
3. Undoing the last editing operation
• With this function you can undo the editing operation last performed and reset the settings to as they were one step
before that point. This comes in handy if you make a mistake when editing.
1
2
3
In the stop mode, press the EDIT button.
• “
Edit Mode
” is displayed.
Either turn the jog dial on the main unit or press one of the automatic search buttons (
8
and
9
) on the
remote control unit.
• Display “
Undo?
”.
• One of the following messages appears, depending on the type of editing operation last performed:
* When a track or disc title has been input or changed
/
“
Name Undo?
”
* When a track title, disc title, a single track, all tracks or part of a track has been erased
/
“
Erase Undo?
”
* When a track has been divided
/
“
Divide Undo?
”
* When tracks have been combined
/
“
Combine Undo?
”
* When the move or program move function has been used
/
“
Move Undo?
”
* When a group has been changed or deleted
/
“
Group Undo?
”
* When the group name was not edited when the group was created
/
“
Group Undo?
”
• “ CC
Undo?
” is not displayed if no editing operation has been performed or if the undo operation is not
possible.
• The UNDO function cannot be used in the following cases:
* Once the TOC data has been rewritten
* Once you have recorded or edited something new
* After a power failure
* After the UNDO operation has been used once
* When a title has been input in a mode other than the stop mode
* When the disc recovery function has been used
Press the ENTER button.
• “
Undo OK?
” is displayed.
1
18T r 0 2 m 4 6 s
-60 40 -30 -20 -12 -6 -2 0
L
dB
R
POWER LOADING MECHANISM
ON / STANDBY
MINIDISC RECORDER DMD-F101
INPUT
- +
MULTI REC CD SRS EDIT
1 3
REC LEVEL
/ ENTER
MEMO REC /
CHARACTER
5 1
2~4
EJECT POWER
1 2 3
4 5 6
7 8 9
10 +10 CALL
REMOTE CONTROL UNIT RC-282
M
CLEAR GROUP
PROG/
DIRECT
REPEAT RANDOM EDIT ENTER
TIME TITLE CHARACTER
3,4
1
5
2
(Remote control unit)
(Main unit)
5
Press the 5 (eject) button.
• The TOC data is written and the disc is ejected.
• When TOC writing starts, the “
” indicator flashes. Do not shake the main unit or unplug the power
cord while the TOC is being written. If the data is not recorded properly, it will not be possible to play the
disc.
• The TOC data can also be recorded by performing the following operations:
• Pressing the power button to set the power to the standby mode.
• Pressing the
2
(stop) button in the stop mode.
• To set back to the previous setting, press the CLEAR button.
• To cancel the undo operation, press the
2
(stop) or CLEAR button before step 4.
4
Press the ENTER button to clear the editing.
• “
Complete
” is displayed.