45
Information
Information on the main unit’s various settings (Status) and on input signals (Audio Input Signal) is shown
on the display.
The information displayed changes each time you press
STATUS
on the main unit.
The information is displayed for several seconds before the display returns to its original condition.
G
Items to be checked
H
•
Input source
•
Surround mode
•
Input digital terminal
etc.
Press
INFO
to display current source name, volume, surround mode name, and
other information at the bottom of the screen.
Information
SOURCE:CBL/SAT
MODE
:MULTI CH STEREO
Master Volume: 0.0
NOTE
The information displayed differs according to the input source.
Dialogue normalization function
This function is automatically activated when playing Dolby Digital sources.
It automatically corrects the standard signal level for individual program sources.
The correction value can be checked using
STATUS
on the main unit.
Offset: - 4dB
The figure is the corrected value. This cannot be changed.
Other settings
Switching between PAL and NTSC signal formats
Set the video signal format to be output for the TV you are using.
•
The factory setting is “PAL”.
SOURCE SELECT
1
SOURCE SELECT
0
STATUS
1
Press and hold
STATUS
and
SOURCE SELECT
0
for at least 3 seconds.
“V.Format:<PAL>” appears on the display.
2
Press
SOURCE SELECT
0 1
and set the video signal format.
3
Press
STATUS
to complete the setting.
NOTE
When a format other than the video format of the connected TV is set, the picture will not be displayed
properly.
Basic instr
uctions
A
dv
anced instr
uctions
Inf
or
mation
A
dv
anced instr
uctions
DVD
