13
Connecting an FM/AM antenna
•
Connect the FM antenna or AM loop antenna supplied with the unit
to enjoy listening to radio broadcasts.
•
After connecting the antenna and receiving a broadcast signal
page 17 “Listening to FM/AM broadcasts”), fix the antenna
with tape in a position where the background noise level becomes
minimal and the sound quality is most clear.
w
e
q
FM outdoor
antenna
Direction of
broadcasting station
75 Ω/ohms
coaxial cable
Ground
AM outdoor
antenna
AM loop antenna
(supplied)
Black
White
FM indoor
antenna
(supplied)
n
AM loop antenna assembly
1
Put the stand section
through the bottom of the
loop antenna from the
rear and bend it forward.
Stand
Square
hole
Projecting
part
Loop
antenna
2
Insert the projecting part
into the square hole in
the stand.
n
Using the AM loop antenna
Suspending on a wall
Suspend directly on a wall without assembling.
Nail, tack, etc.
Standing alone
Use the procedure shown above to assemble.
NOTE
•
Do not connect two FM antennas simultaneously.
•
Even if an external AM antenna is used, do not disconnect the AM
loop antenna.
•
Make sure the AM loop antenna lead terminals do not touch metal
parts of the panel.
•
If the signal has noise interference, connect the ground terminal
(GND) to reduce noise.
•
If you are unable to receive a good broadcast signal, we recommend
installing an outdoor antenna. For details, inquire at the retail store
where you purchased the unit.
Connecting a portable player
If a portable player is connected via the PORTABLE input jack of the
unit, music from the portable player can be played.
AUDIO
AUDIO
OUT
Portable
player
Connecting other devices
Basic instr
uctions
A
dv
anced instr
uctions
Inf
or
mation
Basic instr
uctions
DVD